Launch x431 Diagun III install battery, TF card and Connections

                 Launch x431 Diagun III install battery, TF card and Connections

         

Launch X431 Diagun III Install battery

Install steps are referred to as below:

1. Follow Fig.a to push the underside cabinet toward open position, after which take it off.

2. Remove battery make up the package box and do the installation as indicated on Fg.b.

3. Cover the readers cabinet and push it backwards towards the original position, as proven on Fig.c.

To take apart battery, turn back steps that you simply adopted to set up battery.

                                   

 

Launch X431 Diagun III Install TF card

Installation steps are the following:

1. Remove the TF card from package box.

2. Place the TF card in to the X-431 Diagun III TF card slot perpendicularly. Make certain it's fully placed in the best place using the "micro"label facing upward. See Fig.d and e.

                             

 

Launch X431 Diagun III Connections

Cable (wired) Connection Process of X-4311 Diagun III:

1. Connect one finish from the diagnostic cable towards the USB port of X-431 Diagun III primary unit

2. Connect another finish from the diagnostic cable towards the Micro USB port from the DBScar diagnostic connector

3. Discover the vehicle's DLC

4. Plug the 16 PIN finish of DBScar diagnostic connector in to the vehicle?¡¥s DLC and also the energy indications of X-431 Diagun III primary unit and DBScar connector will illuminate.