Purchase one BMW tool used as BMW EEPROM/ Odometer/key programmer

    Get one BMW tool used as BMW EEPROM/ Odometer/key programmer

Today, I introduce something named BMW Multi tool V1.2, which has the functions including: Write & read EEPROM, read modify KM held in CAS system, Synchronization Codes and Key Learn function.

What hardware & software BMW Multi tool V1.2 includes?

1. OBD II CONNECTOR: Connects the tool for the vehicle??£¤s Data Link connector (DLC).

2. Dongle: USB dongle.

3. USB CONNECTOR: Connects the tool for the PC/Laptop through USB Cable.

4. Programmer: Program secrets.

5. Programmer Female Pin: Connects programmer to device.

6. Programmer Male Pin: Connects programmer to device.

 

                     

 

 

What functions BMW Multi tool V1.2 supports?

EEPROM Function:

Read EEPROM, Write EEPROM, Save File, Load File?-

1). You need to backup the CAS EEPROM before prepare dealer key. After succeed read EEPROM, please save it as being back file. This task is essential.

2). Now can't browse the whole EEPROM for cas3 system. However the primary section is contained. It ought to be saved. While you're reading CAS EEPROM, it'll give tips (Press alright to continue).

Odometer:

Support read and alter KM saved in CAS system.

Don't support to alter KM in instrument. If you wish to alter the KM display in instrument. You need to change KM in CAS system first. Then customize the KM in instrument by hand.

Synchronization Codes:

1). CAS3 code-DME, CAS3code-EGS: Read DME and EGS code saved in CAS3 system.

2). Synchronize DME and CAS?a this function is going to be helpful while prepare dealer key or other operation which cause can't start the engine.

3). Synchronize CAS and ELV ?a this function might help obvious wheel errors

Key Learn

Function introduction:

1). Get Key Info: With this particular function you will get the important thing cutting, remote frequency, and key data.

2). Save Key Info: Save the read key info.

3). Load Key Info: Load the saved key info. To determine the important thing data and get ready for write key info.

4). Write Key Info: Write the loaded key info into CAS system.

5). Make Dealer Key: You are able to prepare dealer key once you get key info effectively. You also should select the important thing position.

6). Add key: Add some new dealer key into CAS system. Some CAS system needs this task to begin the engine.

7). Enable Key: Place the present key into ignition switch, press "Enable Key". The important thing after current key is going to be enabled.

8). Disable Key: Place the present key into ignition switch, press ?¡ãDisable key?¡À. The important thing after current key is going to be disabled.

9). Obvious DTC: Before prepare dealer key after it this can be used function to obvious DTC.

10). Obvious Shadow: Before prepare dealer key after it this can be used function to obvious Shadow.

7. File Make Key

1). Choose CAS or EWS type.

2). Load the choose EEPROM file you're going to get the make dealer key window.

3). Choose key position and press "Make Dealer Key" button. Flow the given ideas to prepare dealer key. After succeed it can save you the brand new EEPROM dump file.

- For EWS1, EWS2, EWS3, EWS4, CAS1, CAS2, CAS3 type the prepared dealer key can begin the engine directly.

- For many CA3  type you have to write back the brand new dump file into vehicle.

4). CAS3 secure data, only OBDII prepare make secret is support for CAS3 secure data.

Using BMW multi tool V1.2?

BMW Multi Tool includes forth parts, hardware device, dongle, programmer, software. Before you run software you have to connect dongle and hardware device to computer.